Bobine en acier inoxydable finition 2D 409L 439 Grade
Bobines en acier inoxydable AISI 439 et 409L 2D
En juin, notre société a exporté deux qualités de bobines d'acier inoxydable vers l'Équateur, 439 et Bobines en acier inoxydable 409l. En raison du faible prix cible du client, nous avons négocié avec le client pour exporter la bobine en acier inoxydable avec une surface 2D. En fait, nous exportons rarement cette surface, mais nous attachons également une grande importance à la qualité du produit. Nous avons dit à l'usine de vérifier la qualité dans notre bureau pendant la production.
409L 439 Bobine en acier inoxydable finition 2D
TAILLE SPÉCIFIQUE | Alliage | Finition | MT |
---|---|---|---|
1.2mm x 1220mm x Bobine | AISI 439 | 2D | 4.880 |
1.0mm x 1220mm x Bobine | AISI 439 | 2D | 9.530 |
1.2mm x 1220mm x Bobine | AISI409L | 2D | 4.925 |
0.6mm x 1220mm x Bobine | AISI409L | 2D | 4.970 |
Paquet de 439 bobines en acier inoxydable 409L Finition 2D
Les exigences d'emballage et d'emballage peuvent être ajustées en fonction des besoins.
Performances de finition 439D de la bobine en acier inoxydable 409 2L
Alliage | Finition | 1 % TS (Mpa) | 0.2 % YS (Mpa) | EL (%) | Dureté – HRB | Dureté – HV |
---|---|---|---|---|---|---|
AISI 439 | 2D | 443 | 278 | 37 | 74 | 138 |
AISI409L | 2D | 393 | 227 | 38 | 70 | 127 |
439 Bobine en acier inoxydable 409L Finition 2D Composition chimique (%)
Alliage | Finition | C | Si | Mn | P | S | Ni | Cr | N | Ti | Nb | Al |
---|---|---|---|---|---|---|---|---|---|---|---|---|
AISI 439 | 2D | 0.010 | 0.42 | 0.21 | 0.026 | 0.001 | 0.12 | 18.01 | 0.007 | 0.195 | 0.133 | 0 |
AISI409L | 2D | 0.012 | 0.51 | 0.17 | 0.020 | 0.003 | 0.12 | 11.19 | 0.010 | 0.164 | - | - |
BL de 439 Bobine en acier inoxydable 409L Finition 2D
MTC de la finition 409D de la bobine en acier inoxydable 439L 2